Acetileno-CA View larger


New product

Acetileno-CA is a hose for supply of acetylene and air at 20 bar pressure.

More details

By buying this product you can collect up to 15 loyalty points. Your cart will total 15 loyalty points that can be converted into a voucher of 0,60 €.

More info

Description of Acetileno-CA hose

The Acetileno-CA is a hose for supply of acetylene and air at 20 bar pressure. This hose withstands temperatures from -10 ° C minimum and maximum to 85 ° C. Manufactured under the UNE-EN 559: 2003, EN ISO 3821, and ISO-1307, which offer a brief description:

ISO 3821: This International Standard specifies requirements for rubber hoses (including hoses twin) used in welding, cutting and allied processes. This International Standard specifies requirements for rubber hoses for normal work of 2 MPa (20 bar) and light duty [limited to hoses for a maximum working pressure of 1 MPa (10 bar) and a smaller inside diameter or equal to 6.3 mm]. This International Standard is applicable to hoses which operate at temperatures from -20ºC to + 60°C and used in:
- Gas welding and cutting;
- Arc welding under the protection of an inert or active gas;
- Related to welding and cutting processes, in particular heating, brazing and metallization.
This International Standard is not applicable for thermoplastic hoses or hoses used for for high pressure acetylene [more than 0.15 MPa (1.5 bar)].

ISO-1307: This International Standard specifies the tolerances on dimensions of hoses elastomers (rubbers) and plastic (pvc) and minimum and maximum permissible bore diameters for each size of hose. To this end, the hoses have been classified into four types, considering the process by which have been manufactured or extrusion mandrel. The standard also specifies the tolerances on the cut length of hose elastomers and plastics for industrial applications in the automotive sector. This standard is used with the relevant product standards hoses, unless there is a justification for using a different size of hose or unless the size of the hose you need a range of different inside diameters for a particular application.

The Acetileno-CA hose has been manufactured continuously. The Acetileno-CA hose is marked with name, standard, type and pressure. Below is a table of features:








(mm) (in) (bar) (psi) (kg/m) (lbs/m) (bar) (psi) (mm) (in) (m) (ft)
00000ACECA006 6x14 1/4" 20/60 290/870 0,130 0,29 - - - - 100 328
00000ACECA009 9x16 3/8" 20/60 290/870 0,210 0,46 - - - - 100 328
00000ACECA010 10x17 13/32" 20/60 290/870 0,230 0,51 - - - - 100 328
00000ACECA013 13x20 1/2" 20/60 290/870 - - - - 100 328
00000ACECA016 16x23 5/8" 20/60 290/870 - - - - 100 328
00000ACECA019 19x26 3/4" 20/60 290/870 - - - - 100 328


Uses of Acetileno-CA hose

The Acetileno-CA is a transport of acetylene hose, for example for welding and cutting with oxy-fuel welding machine (acetylene).

 Manguera para oxigeno indicada para la soldadura oxigas

Materials of Acetileno-CA hose

  • Interior: The Acetileno-CA hose has an inner tube rubber SBR / EPDM black.
  • Reinforcements: It has high tenacity textile reinforcements.
  • Exterior: The outer cover is made of rubber SBR / EPDM red.