Acetileno

Description of Acetileno hose

The Acetileno is a hose for supply of acetylene and air at 20 bar pressure. This hose withstands temperatures from -10 ° C minimum, and maximum to 50 ° C. The hose is manufactured under the ISO-3821 standard, which is a brief description below:

ISO 3821: This International Standard specifies requirements for rubber hoses (including hoses twin) used in welding, cutting and allied processes. This International Standard specifies requirements for rubber hoses for normal work of 2 MPa (20 bar) and light duty [limited to hoses for a maximum working pressure of 1 MPa (10 bar) and a smaller inside diameter or equal to 6.3 mm]. This International Standard is applicable to hoses which operate at temperatures from -20ºC to + 60°C and used in:
- Gas welding and cutting;
- Arc welding under the protection of an inert or active gas;
- Related to welding and cutting processes, in particular heating, brazing and metallization.
This International Standard is not applicable for thermoplastic hoses or hoses used for for high pressure acetylene [more than 0.15 MPa (1.5 bar)].

The Acetileno hose is marked with the name, type and pressure. Below is a list of features:

Tabla 1 - Características de Acetileno

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
0000000ACE106	6x13	1/4"	20/60	290/870	-	-	-	-	-	-	100	328
0000000ACE108	8x15	5/16"	20/60	290/870	-	-	-	-	-	-	100	328
0000000ACE110	10x17	3/8"	20/60	290/870	-	-	-	-	-	-	100	328
0000000ACE112	12x19	1/2"	20/60	290/870	-	-	-	-	-	-	100	328
0000000ACE115	15x22	5/8"	20/60	290/870	-	-	-	-	-	-	100	328

Uses of Acetileno hose

The Acetileno is a hose for transporting acetylene, for example for welding and cutting with oxy-fuel welding machine (acetylene).

Materials of Acetileno hose

• Interior: The hose is formed of rubber-modified PVC, black.
• Reinforcements: The hose has high tenacity textile reinforcements.
• Exterior: The hose is made of rubber-modified PVC, red.