Drainflex 15

Description of Drainflex 15 hose

The Drainflex 15 is a composite hose for suction and discharge of oil, supports a pressure of 15 bar. This hose has excellent thermal properties, withstanding temperatures of -40 ° C minimum, and maximum to 100ºC. Manufactured under BS 5892:1980 standards, EN 13765: 2003 Type 3 which is a brief description below:

EN 13765: This European Standard specifies requirements for four types of multilayer thermoplastic hose (unvulcanized) and union sets with accessories for the transfer of hydrocarbons, solvents and chemicals. Specifies step sizes from 25 mm to 300 mm, working pressures from 4 bar 1) up to 14 bar and temperatures from -30 ºC to 150 ºC. Type 1 hoses are suitable for steam applications. Hoses type 2-4 are suitable for liquid applications.
-NOTE 1 The attention of users is drawn to Annex A concerning the selection of the material of the inner wall of the layers and any polymeric coating of the inner coil in relation to (the) product (s) chemical (s) it will be carried by the hose or union sets with accessories.
-NOTE 2 The manufacturer should be consulted when going to consider using a polymer coating inside wire to carry oil low conductivity or chemical.

Drainflex 15 hose is marked with our brand EUROFLEX, the name of the hose, its type, and the working pressure, according to current regulations. Below is a list of features:

Table 1 - Features of Drainflex 15 ZZ

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
00CCDRAIZZ040	40	1-1/2"	15/75	217/1087	1,30	2,86	0,8	11,60	85	3-3/8	20	65
00CCDRAIZZ050	50	2"	15/75	217/1087	2,00	4,40	0,8	11,60	125	5	20	65
00CCDRAIZZ063	63	2-1/2"	15/75	217/1087	3,00	6,61	0,8	11,60	150	6	20	65
00CCDRAIZZ075	75	3"	15/75	217/1087	3,50	7,71	0,8	11,60	180	7-3/32	20	65
00CCDRAIZZ100	100	4"	15/75	217/1087	4,90	10,80	0,8	11,60	275	10-7/8	20	65
00CCDRAIZZ150	150	6"	15/75	217/1087	11,40	25,13	0,8	11,60	550	21-5/8	20	65
00CCDRAIZZ200	200	8"	15/75	217/1087	17,00	37,47	0,8	11,60	700	27-9/16	20	65
00CCDRAIZZ250	250	10"	12/870	174/870	25,10	55,33	0,8	11,60	900	35-7/16"	10	32

Table 2 - Features of Drainflex 15 PX

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
00CCDRAIXZ040	40	1-1/2"	15/75	217/1087	1,30	2,86	0,8	11,60	85	3-3/8	20	65
00CCDRAIXZ050	50	2"	15/75	217/1087	2,00	4,40	0,8	11,60	125	5	20	65
00CCDRAIXZ063	63	2-1/2"	15/75	217/1087	3,00	6,61	0,8	11,60	150	6	20	65
00CCDRAIXZ075	75	3"	15/75	217/1087	3,50	7,71	0,8	11,60	180	7-3/32	20	65
00CCDRAIXZ100	100	4"	15/75	217/1087	4,90	10,80	0,8	11,60	275	10-7/8	20	65
00CCDRAIXZ150	150	6"	15/75	217/1087	11,40	25,13	0,8	11,60	550	21-5/8	20	65
00CCDRAIXZ200	200	8"	15/75	217/1087	17,00	37,47	0,8	11,60	700	27-9/16	20	65
00CCDRAIXZ250	250	10"	12/870	174/870	25,10	55,33	0,8	11,60	900	35-7/16"	10	32

Table 3 - Features of Drainflex 15 XX

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
00CCDRAIXX040	40	1-1/2"	15/75	217/1087	1,30	2,86	0,8	11,60	85	3-3/8	20	65
00CCDRAIXX050	50	2"	15/75	217/1087	2,00	4,40	0,8	11,60	125	5	20	65
00CCDRAIXX063	63	2-1/2"	15/75	217/1087	3,00	6,61	0,8	11,60	150	6	20	65
00CCDRAIXX075	75	3"	15/75	217/1087	3,50	7,71	0,8	11,60	180	7-3/32	20	65
00CCDRAIXX100	100	4"	15/75	217/1087	4,90	10,80	0,8	11,60	275	10-7/8	20	65
00CCDRAIXX150	150	6"	15/75	217/1087	11,40	25,13	0,8	11,60	550	21-5/8	20	65
00CCDRAIXX200	200	8"	15/75	217/1087	17,00	37,47	0,8	11,60	700	27-9/16	20	65
00CCDRAIXX250	250	10"	12/870	174/870	25,10	55,33	0,8	11,60	900	35-7/16"	10	32

Uses of Drainflex 15 hose

The Drainflex 15 is a composite hose for immersion in hydrocarbon storage tanks. It is suitable for both suction and discharge of hydrocarbons, mineral oil, and other petroleum products.

Materials of Drainflex 15 hose

• Interior: The inner of composite hose is formed by layers of extruded high density polyethylene.
• Interior Reinforcement: The inner reinforcement of composite hose is formed by a spiral of Galvanized Steel, Stainless Steel AISI-304 or Steel coated with Polypropylene (see Table 4).
• Exterior: The exterior of the composite hose consists of a fabric of high density polyethylene.
• Exterior Reinforcement: The exterior reinforcement of composite hose is formed by a spiral wire Galvanized Steel or Stainless Steel AISI-304 (see Table 4).

Composite hose assemblies

• Custom manufacturing:
  • On request we can supply specially coated Fireproof, resistant CL-1.
  • On request we can supply Aramid reinforced for 20, 25 and 40 bar working pressure.
  • On request we can supply the covers with different colors.
• Information:
  • Composite hoses must be fitted by qualified and trained personnel with special equipment.
  • JJB EUROMANGUERAS mounts performed by highly qualified personnel with over 25 years experience in this type of hose.
  • See our Chemical Compatibility Chart.
• Requirements to budget:
  • The price for assembled hoses are quoted under specific request of the customer, this requires knowing the hose diameter, length, type of terminals or connectors mounted (Camlock, Guillemin, Storz, flanges ...) as well as material fittings.
  • Is also interesting to know the type of product that will flow through the hose, to recommend the most suitable hose.
• Traceability:
  • To monitor each of our hoses, proceed to dial on the ferrule, with a control number and date.
  • On request the certificate of tests with their corresponding costs is issued. Go to test certificate.
    
    

 For more information on composite hoses, click here or go to the category Composite Hoses and then click "More".