Exilflex

Description of Exilflex hose

The Exilflex is a composite hose for suction and discharge a variety of chemicals, hydrocarbons and petrochemicals, supports a pressure of 15 bar. This hose has excellent thermal properties, withstanding temperatures of -40°C minimum, and maximum to 100ºC. Manufactured under BS 5842:1980 Class 6.2 standards, EN 13765: 2003 Type 3 which is a brief description below:

EN 13765: This European Standard specifies requirements for four types of multilayer thermoplastic hose (unvulcanized) and union sets with accessories for the transfer of hydrocarbons, solvents and chemicals. Specifies step sizes from 25 mm to 300 mm, working pressures from 4 bar 1) up to 14 bar and temperatures from -30 ºC to 150 ºC. Type 1 hoses are suitable for steam applications. Hoses type 2-4 are suitable for liquid applications.
-NOTE 1 The attention of users is drawn to Annex A concerning the selection of the material of the inner wall of the layers and any polymeric coating of the inner coil in relation to (the) product (s) chemical (s) it will be carried by the hose or union sets with accessories.
-NOTE 2 The manufacturer should be consulted when going to consider using a polymer coating inside wire to carry oil low conductivity or chemical.

The Exilflex hose is marked with our brand EUROFLEX, the name of the hose, its type, and the working pressure, according to current regulations. Below is a list of features:

Table 1 - Features of Exilflex AP

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
00CCEXILAP040	40	1-1/2"	15/75	217/1087	1,30	2,86	0,8	11,60	100	4	20	65
00CCEXILAP050	50	2"	15/75	217/1087	1,90	4,18	0,8	11,60	140	5-1/2	20	65
00CCEXILAP063	63	2-1/2"	15/75	217/1087	2,60	5,73	0,8	11,60	165	6-1/2	20	65
00CCEXILAP075	75	3"	15/75	217/1087	3,20	7,05	0,8	11,60	215	8-15/32	20	65
00CCEXILAP100	100	4"	15/75	217/1087	4,60	10,14	0,8	11,60	290	11-27/64	20	65
00CCEXILAP150	150	6"	15/75	217/1087			0,8	11,60			20	65
00CCEXILAP200	200	8"	15/75	217/1087			0,8	11,60			20	65
00CCEXILAP250	250	10"	15/75	217/1087							10	32

Table 2 - Features of Exilflex PP

Reference	Diameter		Pressure		Weight		Vacuum		Radiuss		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
00CCEXILPP040	40	1-1/2"	15/75	217/1087	1,30	2,86	0,8	11,60	100	4	20	65
00CCEXILPP050	50	2"	15/75	217/1087	1,90	4,18	0,8	11,60	140	5-1/2	20	65
00CCEXILPP063	63	2-1/2"	15/75	217/1087	2,60	5,73	0,8	11,60	165	6-1/2	20	65
00CCEXILPP075	75	3"	15/75	217/1087	3,20	7,05	0,8	11,60	215	8-15/32	20	65
00CCEXILPP100	100	4"	15/75	217/1087	4,60	10,14	0,8	11,60	290	11-27/64	20	65
00CCEXILPP150	150	6"	15/75	217/1087			0,8	11,60			20	65
00CCEXILPP200	200	8"	15/75	217/1087			0,8	11,60			20	65
00CCEXILPP250	250	10"	15/75	217/1087							10	32

Uses of Exilflex hose

The Exilflex is a composite hose for suction and discharge a variety of chemicals, hydrocarbons and petrochemicals. It is widely used in, in tanks, wagons, chemical plants, certain factories and industries, etc ...

Materials of Exilflex hose

• Interior: The inside of the hose composite is formed by layers of Polypropylene and Polyester.
• Interior Reinforcement: The inner reinforcement of composite hose is formed by a spiral of Galvanized Steel coated with Polypropylene,  or Aluminum wire.
• Exterior: The exterior of the composite hose consists of a polyester fabric and PVC.
• Exterior Reinforcement: The exterior reinforcement of composite hose is formed by a spiral of Galvanized Steel wire coated with Polypropylene.

Composite hose assemblies

• Custom manufacturing:
  • On request we can supply specially coated Fireproof, resistant CL-1.
  • On request we can supply Aramid reinforced for 20, 25 and 40 bar working pressure.
  • On request we can supply the covers with different colors.
• Information:
  • Composite hoses must be fitted by qualified and trained personnel with special equipment.
  • JJB EUROMANGUERAS mounts performed by highly qualified personnel with over 25 years experience in this type of hose.
  • See our Chemical Compatibility Chart.
• Requirements to budget:
  • The price for assembled hoses are quoted under specific request of the customer, this requires knowing the hose diameter, length, type of terminals or connectors mounted (Camlock, Guillemin, Storz, flanges ...) as well as material fittings.
  • Is also interesting to know the type of product that will flow through the hose, to recommend the most suitable hose.
• Traceability:
  • To monitor each of our hoses, proceed to dial on the ferrule, with a control number and date.
  • On request the certificate of tests with their corresponding costs is issued. Go to test certificate.
    
    

 For more information on composite hoses, click here or go to the category Composite Hoses and then click "More".