Oilflex 10

Description of Oilflex 10 hose

The Oilflex 10 is a composite hose for suction and discharge of hydrocarbons up to 100% aromatics with a working pressure of 10 bar. This hose has excellent thermal properties, withstanding temperatures of -40 ° C minimum, and maximum to 100. Manufactured under BS 5842:1980 standards, EN 13765: 2003 Type 3 which is a brief description below:

EN 13765: This European Standard specifies requirements for four types of multilayer thermoplastic hose (unvulcanized) and union sets with accessories for the transfer of hydrocarbons, solvents and chemicals. Specifies step sizes from 25 mm to 300 mm, working pressures from 4 bar 1) up to 14 bar and temperatures from -30 ºC to 150 ºC. Type 1 hoses are suitable for steam applications. Hoses type 2-4 are suitable for liquid applications.
-NOTE 1 The attention of users is drawn to Annex A concerning the selection of the material of the inner wall of the layers and any polymeric coating of the inner coil in relation to (the) product (s) chemical (s) it will be carried by the hose or union sets with accessories.
-NOTE 2 The manufacturer should be consulted when going to consider using a polymer coating inside wire to carry oil low conductivity or chemical.

The Oilflex 10 hose is marked with our brand EUROFLEX, the name of the hose, its type, and the working pressure, according to current regulations. Below is a list of features:

Table 1 - Features of Oilflex 10 AA 

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
0EUROOILAA050	50	2"	10/50	145/725	2,00	4,41	0,8	11,60	150	5,91	20	65
0EUROOILAA063	63	2-1/2"	10/50	145/725	2,70	5,95	0,8	11,60	180	7,09	20	65
0EUROOILAA075	75	3"	10/50	145/725	3,20	7,05	0,8	11,60	250	9,84	20	65
0EUROOILAA100	100	4"	10/50	145/725	6,00	13,22	0,8	11,60	350	13,78	20	65
0EUROOILAA150	150	6"	10/50	145/725	9,00	19,84	0,8	11,60	440	17,32	20	65
0EUROOILAA200	200	8"	10/50	145/725	14,50	31,97	0,8	11,60	750	29,53	20	65
0EUROOILAA250	250	10"	10/50	145/725			0,8	11,60			10	32
0EUROOILAA300	300	12"	10/50	145/725			0,8	11,60

Table 2 - Features of Oilflex 10 AZ

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
0EUROOILAZ050	50	2"	10/50	145/725	2,00	4,41	0,8	11,60	150	5,91	20	65
0EUROOILAZ063	63	2-1/2"	10/50	145/725	2,70	5,95	0,8	11,60	180	7,09	20	65
0EUROOILAZ075	75	3"	10/50	145/725	3,20	7,05	0,8	11,60	250	9,84	20	65
0EUROOILAZ100	100	4"	10/50	145/725	6,00	13,22	0,8	11,60	350	13,78	20	65
0EUROOILAZ150	150	6"	10/50	145/725	9,00	19,84	0,8	11,60	440	17,32	20	65
0EUROOILAZ200	200	8"	10/50	145/725	14,50	31,97	0,8	11,60	750	29,53	20	65
0EUROOILAZ250	250	10"	10/50	145/725			0,8	11,60			10	32
0EUROOILAZ300	300	12"	10/50	145/725			0,8	11,60

Table 3 - Features of Oilflex 10 ZZ

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
0EUROOILZZ050	50	2"	10/50	145/725	2,00	4,41	0,8	11,60	150	5,91	20	65
0EUROOILZZ063	63	2-1/2"	10/50	145/725	2,70	5,95	0,8	11,60	180	7,09	20	65
0EUROOILZZ075	75	3"	10/50	145/725	3,20	7,05	0,8	11,60	250	9,84	20	65
0EUROOILZZ100	100	4"	10/50	145/725	6,00	13,22	0,8	11,60	350	13,78	20	65
0EUROOILZZ150	150	6"	10/50	145/725	9,00	19,84	0,8	11,60	440	17,32	20	65
0EUROOILZZ200	200	8"	10/50	145/725	14,50	31,97	0,8	11,60	750	29,53	20	65
0EUROOILZZ250	250	10"	10/50	145/725			0,8	11,60			10	32
0EUROOILZZ300	300	12"	10/50	145/725			0,8	11,60

Uses of Oilflex 10 hose

The Oilflex 10 composite hose is used for suction and impulsion of hydrocarbons (oils, lubricants, fuels) to 100% aromatics. It is widely used in docks and shipyards, cisterns, wagons, refineries and oil processing plants, large ships and cargo ships, oil platforms, etc ...

Materials of Oilflex 10 hose

• Interior: Inside Oilflex 10 composite hose, consists of layers of polypropylene and polyester rolled up.
• Reinforcement Interior: The inner reinforcement of composite hose Oilflex 10 is formed by a spiral of aluminum or galvanized steel (see Table 4).
• Exterior: The exterior of the composite hose Oilflex 10 is formed of a polyester fabric impregnated with PVC blue, black or yellow.
• Refuerzo Exterior: Outside reinforcement of composite hose Oilflex , is formed by a spiral wire made of aluminum or galvanized steel (see Table 4).

Composite hose assemblies

• Custom manufacturing:
  • On request we can supply specially coated Fireproof, resistant CL-1.
  • On request we can supply Aramid reinforced for 20, 25 and 40 bar working pressure.
  • On request we can supply the covers with different colors.
• Information:
  • Composite hoses must be fitted by qualified and trained personnel with special equipment.
  • JJB EUROMANGUERAS mounts performed by highly qualified personnel with over 25 years experience in this type of hose.
  • See our Chemical Compatibility Chart.
• Requirements to budget:
  • The price for assembled hoses are quoted under specific request of the customer, this requires knowing the hose diameter, length, type of terminals or connectors mounted (Camlock, Guillemin, Storz, flanges ...) as well as material fittings.
  • Is also interesting to know the type of product that will flow through the hose, to recommend the most suitable hose.
• Traceability:
  • To monitor each of our hoses, proceed to dial on the ferrule, with a control number and date.
  • On request the certificate of tests with their corresponding costs is issued. Go to test certificate.
    
    

 For more information on composite hoses, click here or go to the category Composite Hoses and then click "More".