Euro Polychem

Description of Euro Polychem hose

Standard 1307: This International Standard specifies the tolerances on dimensions of hoses elastomers (rubbers) and plastic (pvc) and minimum and maximum permissible bore diameters for each size of hose. To this end, the hoses have been classified into four types, considering the process by which have been manufactured or extrusion mandrel. The standard also specifies the tolerances on the cut length of hose elastomers and plastics for industrial applications in the automotive sector. This standard is used with the relevant product standards hoses, unless there is a justification for using a different size of hose or unless the size of the hose you need a range of different inside diameters for a particular application.

Standard DIN-12115: This European Standard specifies requirements for two types of hose assemblies with fittings binding (Type D and SD) and four grades based on the electrical properties of hoses made of rubber or thermoplastics and its accessories manufactured by metal, designed to carry liquid or gaseous chemicals. Hose assemblies with accessories are meant to be used in a temperature range from -20 to + 65 ° C at a pressure of ≤ 10 bar (1 bar = 0.1 MPa.)

This hose is made of mandrel. The Euro Polychem hose is marked with name, type and pressure. Below is a table of features:

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
0000002336013	13x23	1/2"	16/48	232/696			0,9	13			40	131
0000002336019	19x31	3/4"	16/48	232/696	0,650	1,43	0,9	13	57	2-1/4"	40	131
0000002336025	25x37	1"	16/48	232/696	0,800	1,76	0,9	13	75	3"	40	131
0000002336032	32x44	1-1/4"	16/48	232/696	1,100	2,42	0,9	13	96	3-3/4"	40	131
0000002336038	38x51	1-1/2"	16/48	232/696	1,200	2,64	0,9	13	114	4-1/2"	40	131
0000002336051	51x66	2"	16/48	232/696	1,900	4,18	0,9	13	150	6"	40	131
0000002336063	63x79	2-1/2"	16/48	232/696	2,300	5,07	0,9	13	189	7-7/16"	40	131
0000002336076	76x91	3"	16/48	232/696	2,800	6,17	0,8	11	225	8-55/64"	40	131
0000002336102	102x111	4"	16/48	232/696	3,800	8,37	0,8	11	300	12"	40	131

Uses of Euro Polychem hose

The Euro Polychem is a hose UHMWP (Ultra-high-molecular-weight polyethylene) aspiration to harsh chemicals, mainly used in the industry.

Materials of Euro Polychem hose

The Euro Polychem hose has an inner tube UHMWP (high molecular weight polyethylene). The outer cover is green EPDM rubber or black corrugated. Has textile reinforcement and a coil wire and a braid to static discharge.