close
Bio 15 XZ View larger

Bio 15 XZ

New product

The Bio 15 is a composite hose for suction and discharge of oil, supports a pressure of 15 bar.

More details

By buying this product you can collect up to 15 loyalty points. Your cart will total 15 loyalty points that can be converted into a voucher of 0,60 €.


More info

Description of Bio 15 hose

The Bio 15 is a composite hose for suction and discharge of oil, supports a pressure of 15 bar. This hose has excellent thermal properties, withstanding temperatures of -40 ° C minimum, and maximum to 100ºC. It is manufactured under the standards BS 5892: 1980 Class 6.2, EN 13765: 2003 Type 3 - ATEX 94/9 / EC, which is a brief description below:

EN 13765: This European Standard specifies requirements for four types of multilayer thermoplastic hose (unvulcanized) and union sets with accessories for the transfer of hydrocarbons, solvents and chemicals. Specifies step sizes from 25 mm to 300 mm, working pressures from 4 bar 1) up to 14 bar and temperatures from -30 ºC to 150 ºC. Type 1 hoses are suitable for steam applications. Hoses type 2-4 are suitable for liquid applications.
-NOTE 1 The attention of users is drawn to Annex A concerning the selection of the material of the inner wall of the layers and any polymeric coating of the inner coil in relation to (the) product (s) chemical (s) it will be carried by the hose or union sets with accessories.
-NOTE 2 The manufacturer should be consulted when going to consider using a polymer coating inside wire to carry oil low conductivity or chemical.

Bio 15 hose is marked with our brand EUROFLEX, the name of the hose, its type, and the working pressure, according to current regulations. Below is a list of features:

Table 1 - Features of Bio 15 XZ

Reference

Diameter

Pressure

Weight
 
Vacuum

Radius

Rolls
(mm) (in) (bar) (psi) (kg/m) (lbs/m) (bar) (psi) (mm) (in) (m) (ft)
00CCBIO1XZ025 25 1" 15/75 217/1087 0,80 1,76 0,8 11,60 100 4 20 65
00CCBIO1XZ040 40 1-1/2" 15/75 217/1087 1,30 2,86 0,8 11,60 100 6 20 65
00CCBIO1XZ050 50 2" 15/75 217/1087 2,00 4,40 0,8 11,60 180 7 20 65
00CCBIO1XZ063 63 2-1/2" 15/75 217/1087 3,00 6,61 0,8 11,60 201 8 20 65
00CCBIO1XZ075 75 3" 15/75 217/1087 3,50 7,71 0,8 11,60 252 10 20 65
00CCBIO1XZ100 100 4" 15/75 217/1087 4,90 10,80 0,8 11,60 354 14 20 65
00CCBIO1XZ150 150 6" 15/75 217/1087 11,40 25,13 0,8 11,60 505 20 20 65
00CCBIO1XZ200 200 8" 15/75 217/1087 17,00 37,47 0,8 11,60 20 65

 

Table 2 - Features of Bio 15 XX

Reference

Diameter

Pressure

Weight

Vacuum

Radius

Rolls
(mm) (in) (bar) (psi) (kg/m) (lbs/m) (bar) (psi) (mm) (in) (m) (ft)
00CCBIO1XX025 25 1" 15/75 217/1087 0,80 1,76 0,8 11,60 100 4 20 65
00CCBIO1XX040 40 1-1/2" 15/75 217/1087 1,30 2,86 0,8 11,60 100 6 20 65
00CCBIO1XX050 50 2" 15/75 217/1087 2,00 4,40 0,8 11,60 180 7 20 65
00CCBIO1XX063 63 2-1/2" 15/75 217/1087 3,00 6,61 0,8 11,60 201 8 20 65
00CCBIO1XX075 75 3" 15/75 217/1087 3,50 7,71 0,8 11,60 252 10 20 65
00CCBIO1XX100 100 4" 15/75 217/1087 4,90 10,80 0,8 11,60 354 14 20 65
00CCBIO1XX150 150 6" 15/75 217/1087 11,40 25,13 0,8 11,60 505 20 20 65
00CCBIO1XX200 200 8" 15/75 217/1087 17,00 37,47 0,8 11,60 20 65

 

Uses of Bio 15 hose

The Bio 15 is a composite hose for suction and impulsion for hydrocarbons, especially designed for ecological fuels like biodiesel, bioethanol and other products such as adblue ... It is very used in tanks, cars, refineries, petrochemical plants, certain factories and industries, etc ...

Composite hoses for petrochemical productsComposite hoses for ecological hidrocarbons

Materials of Bio 15 hose

  • Interior: The inner of  composite hose is formed by layers of extruded high density polyethylene.
  • Interior Reinforcements: The inner reinforcements of composite hose is formed by a wire coil galvanized steel or stainless steel AISI-304 (see Table 4).
  • Exterior: The exterior of the composite hose consists of a fabric of high density polyethylene red.
  • Exterior Reinforcements: The exterior hose reinforcement composite is formed by a spiral galvanized steel wire or stainless steel AISI-304 (see Table 4).

 

Table 4 - Materials
Layer Type XZ XX
Exterior Cover(ce)
High Density Polyethylene High Density Polyethylene
Exterior Wire(ae)
Galvanized Steel Stainless Steel
First Interior Layer(pc)
High Density Polyethylene High Density Polyethylene
Interior Wire (ai)
Stainless Steel Stainless Steel

 

Section of composite hoses
 


 

Composite hose assemblies

  • Custom manufacturing:
    • On request we can supply specially coated Fireproof, resistant CL-1.
    • On request we can supply Aramid reinforced for 20, 25 and 40 bar working pressure.
    • On request we can supply the covers with different colors.
  • Information:
    • Composite hoses must be fitted by qualified and trained personnel with special equipment.
    • JJB EUROMANGUERAS mounts performed by highly qualified personnel with over 25 years experience in this type of hose.
    • See our Chemical Compatibility Chart.
  • Requirements to budget:
    • The price for assembled hoses are quoted under specific request of the customer, this requires knowing the hose diameter, length, type of terminals or connectors mounted (Camlock, Guillemin, Storz, flanges ...) as well as material fittings.
    • Is also interesting to know the type of product that will flow through the hose, to recommend the most suitable hose.
  • Traceability:
    • To monitor each of our hoses, proceed to dial on the ferrule, with a control number and date.
    • On request the certificate of tests with their corresponding costs is issued. Go to test certificate.

      Scheme composite hose assembly

 

 For more information on composite hoses, click here or go to the category Composite Hoses and then click "More".