Higraflex 15 PZ

Description of Higraflex 15 hose

The Higraflex 15 is a composite hose for suction and discharge of hydrocarbons from aviation, supports a pressure of 15 bar. This hose has excellent thermal properties, withstanding temperatures of -40 ° C minimum, and maximum of up to 80 ° C. Manufactured under BS 3492:1987 standards, EN 13765: 2003 Type 3 which is a brief description below:

EN 13765: This European Standard specifies requirements for four types of multilayer thermoplastic hose (unvulcanized) and union sets with accessories for the transfer of hydrocarbons, solvents and chemicals. Specifies step sizes from 25 mm to 300 mm, working pressures from 4 bar 1) up to 14 bar and temperatures from -30 ºC to 150 ºC. Type 1 hoses are suitable for steam applications. Hoses type 2-4 are suitable for liquid applications.
-NOTE 1 The attention of users is drawn to Annex A concerning the selection of the material of the inner wall of the layers and any polymeric coating of the inner coil in relation to (the) product (s) chemical (s) it will be carried by the hose or union sets with accessories.
-NOTE 2 The manufacturer should be consulted when going to consider using a polymer coating inside wire to carry oil low conductivity or chemical.

Higraflex 15 hose is marked with our brand EUROFLEX, the name of the hose, its type, and the working pressure as well as its year of manufacture, according to current regulations. Below is a list of features:

Table 1 - Features of Higraflex 15 PZ

Reference	Diameter		Pressure		Weight		Vacuum		Radiuss		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
00CCH101PZ025	25	1"	15/75	217/1087	0,80	1,76	0,8	11,60	75	3	20	65
00CCH101PZ040	40	1-1/2"	15/75	217/1087	1,30	2,86	0,8	11,60	85	3-3/8	20	65
00CCH101PZ050	50	2"	15/75	217/1087	2,00	4,40	0,8	11,60	125	5	20	65
00CCH101PZ063	63	2-1/2"	15/75	217/1087	3,00	6,61	0,8	11,60	150	6	20	65
00CCH101PZ075	75	3"	15/75	217/1087	3,50	7,71	0,8	11,60	180	7-3/32	20	65
00CCH101PZ100	100	4"	15/75	217/1087	4,90	10,80	0,8	11,60	275	10-7/8	20	65
00CCH101PZ150	150	6"	15/75	217/1087	11,40	25,13	0,8	11,60	550	21-5/8	20	65
00CCH101PZ200	200	8"	15/75	217/1087	17,00	37,47	0,8	11,60	700	27-9/16	20	65
00CCH101PZ250	250	10"	12/60	174/870	25,10	55,33	0,8	11,60	900	35-7/16	10	32

Table 2 - Features of Higraflex 15 XZ

Reference	Diameter		Presure		Weight		Vacuum		Radiuss		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
00CCH101XZ025	25	1"	15/75	217/1087	0,80	1,76	0,8	11,60	75	3	20	65
00CCH101XZ040	40	1-1/2"	15/75	217/1087	1,30	2,86	0,8	11,60	85	3-3/8	20	65
00CCH101XZ050	50	2"	15/75	217/1087	2,00	4,40	0,8	11,60	125	5	20	65
00CCH101XZ063	63	2-1/2"	15/75	217/1087	3,00	6,61	0,8	11,60	150	6	20	65
00CCH101XZ075	75	3"	15/75	217/1087	3,50	7,71	0,8	11,60	180	7-3/32	20	65
00CCH101XZ100	100	4"	15/75	217/1087	4,90	10,80	0,8	11,60	275	10-7/8	20	65
00CCH101XZ150	150	6"	15/75	217/1087	11,40	25,13	0,8	11,60	550	21-5/8	20	65
00CCH101XZ200	200	8"	15/75	217/1087	17,00	37,47	0,8	11,60	700	27-9/16	20	65
00CCH101XZ250	250	10"	12/60	174/870	25,10	55,33	0,8	11,60	900	35-7/16	10	32

Table 3 -Features of Higraflex 15 XX

Reference	Diameter		Pressure		Weight		Vacuum		Radiuss		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
00CCH101XX025	25	1"	15/75	217/1087	0,80	1,76	0,8	11,60	75	3	20	65
00CCH101XX040	40	1-1/2"	15/75	217/1087	1,30	2,86	0,8	11,60	85	3-3/8	20	65
00CCH101XX050	50	2"	15/75	217/1087	2,00	4,40	0,8	11,60	125	5	20	65
00CCH101XX063	63	2-1/2"	15/75	217/1087	3,00	6,61	0,8	11,60	150	6	20	65
00CCH101XX075	75	3"	15/75	217/1087	3,50	7,71	0,8	11,60	180	7-3/32	20	65
00CCH101XX100	100	4"	15/75	217/1087	4,90	10,80	0,8	11,60	275	10-7/8	20	65
00CCH101XX150	150	6"	15/75	217/1087	11,40	25,13	0,8	11,60	550	21-5/8	20	65
00CCH101XX200	200	8"	15/75	217/1087	17,00	37,47	0,8	11,60	700	27-9/16	20	65
00CCH101XX250	250	10"	12/60	174/870	25,10	55,33	0,8	11,60	900	35-7/16	10	32

Uses of Higraflex 15 hose

The Higraflex 15 is a composite hose for suction and impulsion aviation oil, mineral oil, kerosene, etc. It is mainly used for military purposes as well as its industry.

Materials of Higraflex 15 hose

• Interior: The interior of the composite hose consists of layers of high molecular weight polyethylene (UHMW PLT).
• Interior Reinforcements: The inner reinforcement of composite hose consists of a spiral stainless steel AISI-316 (see Table 4).
• Exterior: The exterior of the composite hose consists of a woven polyester impregnated PVC green NATO.
• Exterior Reinforcements: The exterior reinforcement of composite hose is formed by a spiral of galvanized steel wire or stainless steel (see Table 4).

Composite hose assemblies

• Custom manufacturing:
  • On request we can supply specially coated Fireproof, resistant CL-1.
  • On request we can supply Aramid reinforced for 20, 25 and 40 bar working pressure.
  • On request we can supply the covers with different colors.
• Information:
  • Composite hoses must be fitted by qualified and trained personnel with special equipment.
  • JJB EUROMANGUERAS mounts performed by highly qualified personnel with over 25 years experience in this type of hose.
  • See our Chemical Compatibility Chart.
• Requirements to budget:
  • The price for assembled hoses are quoted under specific request of the customer, this requires knowing the hose diameter, length, type of terminals or connectors mounted (Camlock, Guillemin, Storz, flanges ...) as well as material fittings.
  • Is also interesting to know the type of product that will flow through the hose, to recommend the most suitable hose.
• Traceability:
  • To monitor each of our hoses, proceed to dial on the ferrule, with a control number and date.
  • On request the certificate of tests with their corresponding costs is issued. Go to test certificate.
    
    

 For more information on composite hoses, click here or go to the category Composite Hoses and then click "More".