Hitempflex 15 XZ View larger

Hitempflex 15

New product

The Hitempflex 15 is a composite hose for suction and discharge of chemicals, with a working pressure of 15 bar.

More details

By buying this product you can collect up to 15 loyalty points. Your cart will total 15 loyalty points that can be converted into a voucher of 0,60 €.


More info

Description of Hitempflex 15 hose

The Hitempflex 15 is a composite hose for suction and discharge of chemicals, with a working pressure of 15 bar. This hose has excellent thermal properties, withstanding temperatures of -40 ° C minimum, and maximum of up to 200 ° C. Manufactured under BS 5842:1980 standards, EN 13765: 2003 Type 3 which is a brief description below:EN 13765:

This European Standard specifies requirements for four types of multilayer thermoplastic hose (unvulcanized) and union sets with accessories for the transfer of hydrocarbons, solvents and chemicals. Specifies step sizes from 25 mm to 300 mm, working pressures from 4 bar 1) up to 14 bar and temperatures from -30 ºC to 150 ºC. Type 1 hoses are suitable for steam applications. Hoses type 2-4 are suitable for liquid applications.
-NOTE 1 The attention of users is drawn to Annex A concerning the selection of the material of the inner wall of the layers and any polymeric coating of the inner coil in relation to (the) product (s) chemical (s) it will be carried by the hose or union sets with accessories.
-NOTE 2 The manufacturer should be consulted when going to consider using a polymer coating inside wire to carry oil low conductivity or chemical.

Hitempflex hose 15 is marked with our brand EUROFLEX, the name of the hose, its type, and the working pressure, according to current regulations. Below is a list of features:

Table 1 - Features of Hitempflex 15 XZ

Reference

Diameter

Pressure

Weight
 
Vacuum

Radius

Rolls
(mm) (in) (bar) (psi) (kg/m) (lbs/m) (bar) (psi) (mm) (in) (m) (ft)
00CCQ305XZ025 25 1" 15/75 217/1087 1,20 2,64 0,8 11,60 90 3-35/64 20 65
00CCQ305XZ040 40 1-1/2" 15/75 217/1087 1,50 3,30 0,8 11,60 110 4-3/8 20 65
00CCQ305XZ050 50 2" 15/75 217/1087 2,10 4,62 0,8 11,60 150 6 20 65
00CCQ305XZ063 63 2-1/2" 15/75 217/1087 2,80 6,17 0,8 11,60 180 7-3/32 20 65
00CCQ305XZ075 75 3" 15/75 217/1087 3,50 7,71 0,8 11,60 220 8-5/8 20 65
00CCQ305XZ100 100 4" 15/75 217/1087 4,90 10,80 0,8 11,60 300 12 20 65
00CCQ305XZ150 150 6" 15/75 217/1087 0,8 11,60 20 65
00CCQ305XZ200 200 8" 15/75 217/1087 0,8 11,60 20 65
00CCQ305XZ250 250 10" 15/75 217/1087 10 32

 

Table 2 - Features of Hitempflex 15 XX

Reference

Diameter

Pressure

Weight
 
Vacuum

Radiuss

Rolls
(mm) (in) (bar) (psi) (kg/m) (lbs/m) (bar) (psi) (mm) (in) (m) (ft)
00CCQ305XX025 25 1" 15/75 217/1087 1,20 2,64 0,8 11,60 90 3-35/64 20 65
00CCQ305XX040 40 1-1/2" 15/75 217/1087 1,50 3,30 0,8 11,60 110 4-3/8 20 65
00CCQ305XX050 50 2" 15/75 217/1087 2,10 4,62 0,8 11,60 150 6 20 65
00CCQ305XX063 63 2-1/2" 15/75 217/1087 2,80 6,17 0,8 11,60 180 7-3/32 20 65
00CCQ305XX075 75 3" 15/75 217/1087 3,50 7,71 0,8 11,60 220 8-5/8 20 65
00CCQ305XX100 100 4" 15/75 217/1087 4,90 10,80 0,8 11,60 300 12 20 65
00CCQ305XX150 150 6" 15/75 217/1087 0,8 11,60 20 65
00CCQ305XX200 200 8" 15/75 217/1087 0,8 11,60 20 65
00CCQ305XX250 250 10" 15/75 217/1087 10 32

 

Uses of Hitempflex 15 hose

The Hitempflex 15 is a composite hose for suction and impulsion of chemicals, specially designed for asphaltic bitumen.

  Manguera para betún asfáltico

Materials of Hitempflex 15 hose

  • Interior: The inner of composite hose, is formed by layers of polytetrafluoroethylene (PTFE) and polyester rolled.
  • Interior Reinforcement: The inner reinforcement of composite hose consists of a stainless steel AISI-304 spiral.
  • Exterior: The exterior of the composite hose consists of a fabric of black silicone.
  • Exterior Reinforcement: The exterior reinforcement of composite hose is formed by a wire coil galvanized steel or stainless steel AISI-304 (see Table 4).

 

Table 4 - Materials
Layer Type XX XZ
Exterior cover (ce)
Silicone Silicone
Exterior wire (ae)
Stainless Steel Galvanized Steel
First Interior Layer (pc)
PTFE/Polyester PTFE/Polyester
Interior wire (ai)
Stainless Steel Stainless Steel

 

Section of composite hoses
 


 

Composite hose assemblies

  • Custom manufacturing:
    • On request we can supply specially coated Fireproof, resistant CL-1.
    • On request we can supply Aramid reinforced for 20, 25 and 40 bar working pressure.
    • On request we can supply the covers with different colors.
  • Information:
    • Composite hoses must be fitted by qualified and trained personnel with special equipment.
    • JJB EUROMANGUERAS mounts performed by highly qualified personnel with over 25 years experience in this type of hose.
    • See our Chemical Compatibility Chart.
  • Requirements to budget:
    • The price for assembled hoses are quoted under specific request of the customer, this requires knowing the hose diameter, length, type of terminals or connectors mounted (Camlock, Guillemin, Storz, flanges ...) as well as material fittings.
    • Is also interesting to know the type of product that will flow through the hose, to recommend the most suitable hose.
  • Traceability:
    • To monitor each of our hoses, proceed to dial on the ferrule, with a control number and date.
    • On request the certificate of tests with their corresponding costs is issued. Go to test certificate.

      Scheme composite hose assembly

 

 For more information on composite hoses, click here or go to the category Composite Hoses and then click "More".