close
Vapflex 10 View larger

Vapflex 10

New product

The Vapflex 10 is a composite hose for suction and discharge of hydrocarbon gases, and others with a working pressure of 10 bar.

More details

By buying this product you can collect up to 15 loyalty points. Your cart will total 15 loyalty points that can be converted into a voucher of 0,60 €.


More info

Description of Vapflex 10 hose

The Vapflex 10 is a composite hose for suction and discharge of hydrocarbon gases, and others with a working pressure of 10 bar. This hose has excellent thermal properties, withstanding temperatures of -40 ° C minimum, and maximum to 100. Manufactured under BS 5842:1980 standards, EN 13765: 2003 Type 3 which is a brief description below:

EN 13765: This European Standard specifies requirements for four types of multilayer thermoplastic hose (unvulcanized) and union sets with accessories for the transfer of hydrocarbons, solvents and chemicals. Specifies step sizes from 25 mm to 300 mm, working pressures from 4 bar 1) up to 14 bar and temperatures from -30 ºC to 150 ºC. Type 1 hoses are suitable for steam applications. Hoses type 2-4 are suitable for liquid applications.
-NOTE 1 The attention of users is drawn to Annex A concerning the selection of the material of the inner wall of the layers and any polymeric coating of the inner coil in relation to (the) product (s) chemical (s) it will be carried by the hose or union sets with accessories.
-NOTE 2 The manufacturer should be consulted when going to consider using a polymer coating inside wire to carry oil low conductivity or chemical.

The Vapflex 10 hose is marked with our brand EUROFLEX, the name of the hose, its type, and the working pressure, according to current regulations. Below is a list of features:

Table 1 - Features of Vapflex 10 PZ

Reference

Diameter

Pressure

Weight
 
Vacuum

Radius

Rolls
(mm) (in) (bar) (psi) (kg/m) (lbs/m) (bar) (psi) (mm) (in) (m) (ft)
00CCG400PZ050 50 2" 10/50 145/725 1,80 3,96 0,8 11,60 125 5 20 65
00CCG400PZ063 63 2-1/2" 10/50 145/725 2,50 5,51 0,8 11,60 150 6 20 65
00CCG400PZ075 75 3" 10/50 145/725 3,00 6,61 0,8 11,60 180 7-3/32 20 65
00CCG400PZ100 100 4" 10/50 145/725 4,30 9,47 0,8 11,60 275 10-7/8 20 65
00CCG400PZ150 150 6" 10/50 145/725 11,00 24,25 0,8 11,60 550 21-21/32 20 65
00CCG400PZ200 200 8" 10/50 145/725 15,00 33,06 0,8 11,60 675 26-37/64 20 65
00CCG400PZ250 250 10" 10/50 145/725 10 32

 

Table 2 - Features of Vapflex 10 ZZ

Reference

Diameter

Pressure

Weight
 
Vacuum

Radius

Rolls
(mm) (in) (bar) (psi) (kg/m) (lbs/m) (bar) (psi) (mm) (in) (m) (ft)
00CCG400PZ050 50 2" 10/50 145/725 1,80 3,96 0,8 11,60 125 5 20 65
00CCG400PZ063 63 2-1/2" 10/50 145/725 2,50 5,51 0,8 11,60 150 6 20 65
00CCG400PZ075 75 3" 10/50 145/725 3,00 6,61 0,8 11,60 180 7-3/32 20 65
00CCG400PZ100 100 4" 10/50 145/725 4,30 9,47 0,8 11,60 275 10-7/8 20 65
00CCG400PZ150 150 6" 10/50 145/725 11,00 24,25 0,8 11,60 550 21-21/32 20 65
00CCG400PZ200 200 8" 10/50 145/725 15,00 33,06 0,8 11,60 675 26-37/64 20 65
00CCG400PZ250 250 10" 10/50 145/725 10 32

 

Uses of Vapflex 10 hose

The Vapflex 10 is a composite hose for suction and impulsion of hydrocarbon gases and vapors. It is widely used in tanks, cars, refineries and oil processing plants, large ships and cargo ships, oil platforms, etc ...

Manguera composite para gases de hidrocarburosManguera composite para gases de hidrocarburosManguera composite para refinerias de petroleoManguera composite para hidrocarburos en buques y barcos

Materials of Vapflex 10 hose

  • Interior: Inside Vapflex 10 composite hose consists of layers of polypropylene and polyester.
  • Interior Reinforcement: The inner reinforcement of composite hose Vapflex 10 is formed by a spiral of aluminum or galvanized steel (see Table 4)
  • Exterior: The exterior of the composite hose Vapflex 10 is formed of a polyester fabric impregnated with yellow PVC.
  • Exterior Reinforcements: Outside reinforcement of composite hose Vapflex is formed by a spiral wire of aluminum or galvanized steel (see Table 4).

 

Table 4 - Materials
Layer Type PZ ZZ
Exterior Cover (ce)
PVC PVC
Exterior Wire(ae)
Galvanized Steel Galvanized Steel
First Interior Layer (pc)
Polypropylene / Polyethylene Polypropylene / Polyethylene
Interior Wire (ai)
Steel coated Polypropylene Galvanized Steel

 

Layer of composite hose Vapflex
 


 

Composite hose assemblies

  • Custom manufacturing:
    • On request we can supply specially coated Fireproof, resistant CL-1.
    • On request we can supply Aramid reinforced for 20, 25 and 40 bar working pressure.
    • On request we can supply the covers with different colors.
  • Information:
    • Composite hoses must be fitted by qualified and trained personnel with special equipment.
    • JJB EUROMANGUERAS mounts performed by highly qualified personnel with over 25 years experience in this type of hose.
    • See our Chemical Compatibility Chart.
  • Requirements to budget:
    • The price for assembled hoses are quoted under specific request of the customer, this requires knowing the hose diameter, length, type of terminals or connectors mounted (Camlock, Guillemin, Storz, flanges ...) as well as material fittings.
    • Is also interesting to know the type of product that will flow through the hose, to recommend the most suitable hose.
  • Traceability:
    • To monitor each of our hoses, proceed to dial on the ferrule, with a control number and date.
    • On request the certificate of tests with their corresponding costs is issued. Go to test certificate.

      Scheme composite hose assembly

 

 For more information on composite hoses, click here or go to the category Composite Hoses and then click "More".