Chemflex 15

Description of Chemflex 15 hose

The Chemflex 15 is a composite hose for suction and discharge a variety of chemicals with a working pressure of 15 bar. This hose has excellent thermal properties, withstanding temperatures of -40 ° C minimum, and maximum to 100`C. Manufactured under BS 5842:1980 Class 6.2 standards, EN 13765: 2003 Type 3 which is a brief description below:

EN 13765: This European Standard specifies requirements for four types of multilayer thermoplastic hose (unvulcanized) and union sets with accessories for the transfer of hydrocarbons, solvents and chemicals. Specifies step sizes from 25 mm to 300 mm, working pressures from 4 bar 1) up to 14 bar and temperatures from -30 ºC to 150 ºC. Type 1 hoses are suitable for steam applications. Hoses type 2-4 are suitable for liquid applications.
-NOTE 1 The attention of users is drawn to Annex A concerning the selection of the material of the inner wall of the layers and any polymeric coating of the inner coil in relation to (the) product (s) chemical (s) it will be carried by the hose or union sets with accessories.
-NOTE 2 The manufacturer should be consulted when going to consider using a polymer coating inside wire to carry oil low conductivity or chemical.

The Chemflex 15 hose is marked with our brand EUROFLEX, the name of the hose, its type, and the working pressure, according to current regulations. Below is a list of features:

Table 1 - Features of Chemflex 15 PZ

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
00CCQ700PZ025	25	1"	15/75	217/1087	0,90	1,98	0,8	11,60	75	3	20	65
00CCQ700PZ040	40	1-1/2"	15/75	217/1087	1,20	2,64	0,8	11,60	85	3-11/32	20	65
00CCQ700PZ050	50	2"	15/75	217/1087	1,80	3,97	0,8	11,60	125	5	20	65
00CCQ700PZ063	63	2-1/2"	15/75	217/1087	2,50	5,51	0,8	11,60	150	7	20	65
00CCQ700PZ075	75	3"	15/75	217/1087	3,00	6,61	0,8	11,60	180	7-3/32	20	65
00CCQ700PZ100	100	4"	15/75	217/1087	4,30	9,47	0,8	11,60	275	10-53/64	20	65
00CCQ700PZ150	150	6"	15/75	217/1087	11,00	24,25	0,8	11,60	550	21-21/32	20	65
00CCQ700PZ200	200	8"	15/75	217/1087	15,00	33,06	0,8	11,60	675	26-37/64	20	65
00CCQ700PZ250	250	10"	15/75	217/1087							10	32

Table 2 - Features of Chemflex 15 PX

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
00CCQ700PX025	25	1"	15/75	217/1087	0,90	1,98	0,8	11,60	75	3	20	65
00CCQ700PX040	40	1-1/2"	15/75	217/1087	1,20	2,64	0,8	11,60	85	3-11/32	20	65
00CCQ700PX050	50	2"	15/75	217/1087	1,80	3,97	0,8	11,60	125	5	20	65
00CCQ700PX063	63	2-1/2"	15/75	217/1087	2,50	5,51	0,8	11,60	150	7	20	65
00CCQ700PX075	75	3"	15/75	217/1087	3,00	6,61	0,8	11,60	180	7-3/32	20	65
00CCQ700PX100	100	4"	15/75	217/1087	4,30	9,47	0,8	11,60	275	10-53/64	20	65
00CCQ700PX150	150	6"	15/75	217/1087	11,00	24,25	0,8	11,60	550	21-21/32	20	65
00CCQ700PX200	200	8"	15/75	217/1087	15,00	33,06	0,8	11,60	675	26-37/64	20	65
00CCQ700PX250	250	10"	15/75	217/1087							10	32

Table 3 - Features of Chemflex 15 XX

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
00CCQ700XX025	25	1"	15/75	217/1087	0,90	1,98	0,8	11,60	75	3	20	65
00CCQ700XX040	40	1-1/2"	15/75	217/1087	1,20	2,64	0,8	11,60	85	3-11/32	20	65
00CCQ700XX050	50	2"	15/75	217/1087	1,80	3,97	0,8	11,60	125	5	20	65
00CCQ700XX063	63	2-1/2"	15/75	217/1087	2,50	5,51	0,8	11,60	150	7	20	65
00CCQ700XX075	75	3"	15/75	217/1087	3,00	6,61	0,8	11,60	180	7-3/32	20	65
00CCQ700XX100	100	4"	15/75	217/1087	4,30	9,47	0,8	11,60	275	10-53/64	20	65
00CCQ700XX150	150	6"	15/75	217/1087	11,00	24,25	0,8	11,60	550	21-21/32	20	65
00CCQ700XX200	200	8"	15/75	217/1087	15,00	33,06	0,8	11,60	675	26-37/64	20	65
00CCQ700XX250	250	10"	15/75	217/1087							10	32

Uses of Chemflex 15 hose

The Chemflex 15 is a composite hose for suction and impulsion of identifying a broad spectrum of chemicals. It is widely used in, in tanks, wagons, chemical plants, certain factories and industries, etc ...

Materials of Chemflex 15 hose

• Interior: Inside Chemflex 15 composite hose consists of polypropylene and polyester layers.
• Interior Reinforcement: The inner reinforcement of composite hose Chemflex 15 is formed by a spiral galvanized steel coated Polypropylene or Stainless Steel (see Table 4).
• Exterior: The exterior of the composite hose Chemflex 15 is formed of a polyester fabric impregnated with green PVC.
• Exterior Reinforcement: The exterior reinforcement of composite hose Chemflex is formed by a spiral of galvanized steel wire or stainless steel (see Table 4).

Composite hose assemblies

• Custom manufacturing:
  • On request we can supply specially coated Fireproof, resistant CL-1.
  • On request we can supply Aramid reinforced for 20, 25 and 40 bar working pressure.
  • On request we can supply the covers with different colors.
• Information:
  • Composite hoses must be fitted by qualified and trained personnel with special equipment.
  • JJB EUROMANGUERAS mounts performed by highly qualified personnel with over 25 years experience in this type of hose.
  • See our Chemical Compatibility Chart.
• Requirements to budget:
  • The price for assembled hoses are quoted under specific request of the customer, this requires knowing the hose diameter, length, type of terminals or connectors mounted (Camlock, Guillemin, Storz, flanges ...) as well as material fittings.
  • Is also interesting to know the type of product that will flow through the hose, to recommend the most suitable hose.
• Traceability:
  • To monitor each of our hoses, proceed to dial on the ferrule, with a control number and date.
  • On request the certificate of tests with their corresponding costs is issued. Go to test certificate.
    
    

 For more information on composite hoses, click here or go to the category Composite Hoses and then click "More".