Chemflex 10

Description of Chemflex 10 hose

The Chemflex 10 is a composite hose for suction and discharge a variety of chemicals with a working pressure of 10 bar. This hose has excellent thermal properties, withstanding temperatures of -40 ° C minimum, and maximum to 100`C. Manufactured under BS 5842:1980 Class 6.2 standards, EN 13765: 2003 Type 3 which is a brief description below:

EN 13765: This European Standard specifies requirements for four types of multilayer thermoplastic hose (unvulcanized) and union sets with accessories for the transfer of hydrocarbons, solvents and chemicals. Specifies step sizes from 25 mm to 300 mm, working pressures from 4 bar 1) up to 14 bar and temperatures from -30 ºC to 150 ºC. Type 1 hoses are suitable for steam applications. Hoses type 2-4 are suitable for liquid applications.
-NOTE 1 The attention of users is drawn to Annex A concerning the selection of the material of the inner wall of the layers and any polymeric coating of the inner coil in relation to (the) product (s) chemical (s) it will be carried by the hose or union sets with accessories.
-NOTE 2 The manufacturer should be consulted when going to consider using a polymer coating inside wire to carry oil low conductivity or chemical.

The Chemflex 10 hose is marked with our brand EUROFLEX, the name of the hose, its type, and the working pressure, according to current regulations. Below is a list of features:

Table 1 - Features of Chemflex 10 PZ

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
EUROCHEMPZ025	25	1"	10/50	145/725	1,00	2,20	0,8	11,60	90	3-35/64	20	65
EUROCHEMPZ040	40	1-1/2"	10/50	145/725	1,60	3,52	0,8	11,60	125	5	20	65
EUROCHEMPZ050	50	2"	10/50	145/725	1,80	3,96	0,8	11,60	160	6-5/16	20	65
EUROCHEMPZ063	63	2-1/2"	10/50	145/725	2,60	5,73	0,8	11,60	180	7-3/32	20	65
EUROCHEMPZ075	75	3"	10/50	145/725	3,00	6,61	0,8	11,60	225	8-7/8	20	65
EUROCHEMPZ100	100	4"	10/50	145/725	5,40	11,90	0,8	11,60	350	13-3/4	20	65
EUROCHEMPZ150	150	6"	10/50	145/725	9,00	19,84	0,8	11,60	440	17-5/16	20	65
EUROCHEMPZ200	200	8"	10/50	145/725	14,50	31,96	0,8	11,60	750	29-1/2	20	65
EUROCHEMPZ250	250	10"	10/50	145/725							10	32

Table 2 - Features of Chemflex 10 PX

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
EUROCHEMPX025	25	1"	10/50	145/725	1,00	2,20	0,8	11,60	90	3-35/64	20	65
EUROCHEMPX040	40	1-1/2"	10/50	145/725	1,60	3,52	0,8	11,60	125	5	20	65
EUROCHEMPX050	50	2"	10/50	145/725	1,80	3,96	0,8	11,60	160	6-5/16	20	65
EUROCHEMPX063	63	2-1/2"	10/50	145/725	2,60	5,73	0,8	11,60	180	7-3/32	20	65
EUROCHEMPX075	75	3"	10/50	145/725	3,00	6,61	0,8	11,60	225	8-7/8	20	65
EUROCHEMPX100	100	4"	10/50	145/725	5,40	11,90	0,8	11,60	350	13-3/4	20	65
EUROCHEMPX150	150	6"	10/50	145/725	9,00	19,84	0,8	11,60	440	17-5/16	20	65
EUROCHEMPX200	200	8"	10/50	145/725	14,50	31,96	0,8	11,60	750	29-1/2	20	65
EUROCHEMPX250	250	10"	10/50	145/725							10	32

Table 3 - Features of Chemflex 10 XX

Reference	Diameter		Pressure		Weight		Vacuum		Radius		Rolls
	(mm)	(in)	(bar)	(psi)	(kg/m)	(lbs/m)	(bar)	(psi)	(mm)	(in)	(m)	(ft)
EUROCHEMXX025	25	1"	10/50	145/725	1,00	2,20	0,8	11,60	90	3-35/64	20	65
EUROCHEMXX040	40	1-1/2"	10/50	145/725	1,60	3,52	0,8	11,60	125	5	20	65
EUROCHEMXX050	50	2"	10/50	145/725	1,80	3,96	0,8	11,60	160	6-5/16	20	65
EUROCHEMXX063	63	2-1/2"	10/50	145/725	2,60	5,73	0,8	11,60	180	7-3/32	20	65
EUROCHEMXX075	75	3"	10/50	145/725	3,00	6,61	0,8	11,60	225	8-7/8	20	65
EUROCHEMXX100	100	4"	10/50	145/725	5,40	11,90	0,8	11,60	350	13-3/4	20	65
EUROCHEMXX150	150	6"	10/50	145/725	9,00	19,84	0,8	11,60	440	17-5/16	20	65
EUROCHEMXX200	200	8"	10/50	145/725	14,50	31,96	0,8	11,60	750	29-1/2	20	65
EUROCHEMXX250	250	10"	10/50	145/725							10	32

Uses of Chemflex 10 hose

The Chemflex 10 is a composite hose for suction and impulsion of identifying a broad spectrum of chemicals. It is widely used in, in tanks, wagons, chemical plants, certain factories and industries, etc ...

Materials of Chemflex 10 hose

• Interior: Inside Chemflex 10 composite hose consists of polypropylene and polyester layers.
• Interior Reinforcement: The inner reinforcement of composite hose Chemflex 10 is formed by a spiral galvanized steel coated Polypropylene or Stainless Steel (see Table 4).
• Exterior: The exterior of the composite hose Chemflex 10 is formed of a polyester fabric impregnated with green PVC.
• Exterior Reinforcement: The exterior reinforcement of composite hose Chemflex is formed by a spiral of galvanized steel wire or stainless steel (see Table 4).

Composite hose assemblies

• Custom manufacturing:
  • On request we can supply specially coated Fireproof, resistant CL-1.
  • On request we can supply Aramid reinforced for 20, 25 and 40 bar working pressure.
  • On request we can supply the covers with different colors.
• Information:
  • Composite hoses must be fitted by qualified and trained personnel with special equipment.
  • JJB EUROMANGUERAS mounts performed by highly qualified personnel with over 25 years experience in this type of hose.
  • See our Chemical Compatibility Chart.
• Requirements to budget:
  • The price for assembled hoses are quoted under specific request of the customer, this requires knowing the hose diameter, length, type of terminals or connectors mounted (Camlock, Guillemin, Storz, flanges ...) as well as material fittings.
  • Is also interesting to know the type of product that will flow through the hose, to recommend the most suitable hose.
• Traceability:
  • To monitor each of our hoses, proceed to dial on the ferrule, with a control number and date.
  • On request the certificate of tests with their corresponding costs is issued. Go to test certificate.
    
    

 For more information on composite hoses, click here or go to the category Composite Hoses and then click "More".